|
Brand |
SUPERMICRO |
|
Model |
X10SLL-F |
|
Chipset |
Intel® C222 Express PCH |
|
Manufacturer Part Number |
MBD-C7H270-CG-ML-O |
|
1U Chassis |
SC113MTQ-R400CB <br/>SC113MTQ-330CB <br/>SC811TQ-441B <br/>SC512F-350B <br/>SC512F-441B <br/>SC813MTQ-R400CB <br/>SC813MTQ-350CB <br/>SC813MTQ-441CB |
|
2U Chassis |
SC213LT-563LPB <br/>SC213LT-600LPB <br/>SC825MTQ-R700LPB <br/>SC823TQ-653LPB |
|
3U Chassis: |
SC833T-653B |
|
4U / Tower Chassis: |
SC745TQ-920B SC745TQ-R920B <br/>SC743TQ-865B-SQ <br/>SC842i-500B <br/>SC842TQ-665B <br/>SC842TQ-865B |
|
BIOS Features |
DMI (SMBIOS) 2.7 <br/>ACPI 5.0 <br/>USB Keyboard support |
|
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
|
CPU |
Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors <br/>Single Socket H3 (LGA 1150) |
|
Dimensions |
9.6" x 9.6", (24.4cm x 24.4 cm) |
|
DIMM Sizes |
8GB, 4GB, 2GB, 1GB |
|
DOM |
SATA DOM (Disk on Module) power connector support |
|
Error Detection |
Corrects single-bit errors <br/>Detects double-bit errors (using ECC memory) |
|
Fan |
Total of five 4-pin fan headers supporting up to 5 fans <br/>5x fans with tachometer status monitoring <br/>Status monitor for speed control <br/>Status monitor for on/off control <br/>Support 3-pin fans (w/o speed control) <br/>Low noise fan speed control <br/>Pulse Width Modulated (PWM) fan connectors |
|
Form Factor |
microATX |
|
Important Chassis Notes |
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. |
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 <br/>IPMI 2.0 with virtual media over LAN and KVM-over-LAN support <br/>Aspeed AST2400 with 10/100/1000M bps MAC |
|
LAN |
2x Gigabit Ethernet LAN ports <br/>1x RJ45 Dedicated IPMI LAN port |
|
LED |
CPU / System Overheat LED <br/>+5V Standby alert LED |
|
Memory Capacity |
4x 240-pin DDR3 DIMM sockets <br/>Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
|
Memory Type |
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
Memory Voltage |
1.5V, 1.35V |
|
Mid/Mini Tower Chassis: |
SC733TQ-665B <br/>SC731i-300B <br/>SC732i-500B <br/>SC732i-865B <br/>SC732D2-903B <br/>SC732D2-865B <br/>SC732D2-500B <br/>SC732D4-903B <br/>SC732D4-865B <br/>SC732D4-500B <br/>SC733TQ-500B |
|
Model(s) |
SYS-5038D-I <br/>SYS-5018D-MF |
|
Network Controllers |
Intel® i217LM + Intel® i210AT Controllers <br/>Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output <br/>1x Realtek RTL8211E PHY (dedicated IPMI) |
|
Non-Operating Relative Humidity Range |
5% ~ 95% (non-condensing) |
|
Non-Operating Temperature Range |
-40°C ~ 70°C (-40°F ~ 158°F) |
|
Operating Relative Humidity Range |
8% ~ 90% (non-condensing) |
|
Operating Temperature Range |
0°C ~ 50°C (32°F ~ 122°F) |
|
Other Features |
Chassis intrusion detection <br/>Chassis intrusion header |
|
PCI-Express |
1x PCI-E 3.0 x8 (in x16) slot <br/>1x PCI-E 3.0 x8 slot <br/>1x PCI-E 2.0 x4 (in x8) slot |
|
Power Configurations |
ACPI / ACPM Power Management <br/>Main Switch Override Mechanism <br/>Power-on mode for AC power recovery <br/>Internal/External modem ring-on |
|
SATA |
SATA3 (6Gbps) w/ RAID 0, 1 <br/>SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 |
|
Serial ATA |
2x SATA3 (6Gbps) ports <br/>4x SATA2 (3Gbps) ports |
|
Serial Port / Header |
2x COM ports (1 rear, 1 header) |
|
Software |
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support <br/>SuperDoctor® III <br/>Watch Dog <br/>NMI |
|
Temperature |
Monitoring for CPU and chassis environment <br/>CPU thermal trip support <br/>FC temperature sensing logic <br/>Thermal Monitor 2 (TM2) support <br/>PECI |
|
TPM |
1x TPM Header |
|
USB |
2x USB 3.0 ports (1 Type-A, 1 via header) <br/>6x USB 2.0 ports (4 rear, 2 via header) |
|
VGA |
BMC integrated Aspeed AST2400 |
|
Video |
1x VGA D-Sub Connector |
|
Voltage |
Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. <br/>5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |